Driving Operation - Daytona E-VIBALL User Manual

-

Driving operation

Before driving, check every parts to
ensure it works normal then drive.
1. Make sure accelerator grip is close
and rear brake applied before you return
the main stand.
2. Stand at left of the motorcycle,
push forward to return the main stand.
3. Straddle onto motorcycle from left,
sit right, use left foot as support to
avoid of falling.
4. Take smart key with you then turn
ignition switch to "
the start button, motorcycle will start；
5. Release the rear brake lever and
turn accelerator grip gradually, the
motorcycle start to go slowly.
6. To reduce the speed, release
Accelerator grip.
" position , press
Note：
■You should review safety-driving
rules in this manual before driving.
■Must remember to let main stand
and side stand returned. Ensure they do
not fall off during driving.
Note：
■
The speed
Accelerator grip, turn Accelerator grip
open , the driving speed will increase,
increase the speed slowly，When getting
start or climbing a slope, you should turn
Accelerator grip open slowly to increase
the power output. When Accelerator grip
returns speed will slow down.
■
Do not turn Accelerator grip open
quickly to avoid of rushing out of the
motorcycle.
41
is regulated via