Daytona E-VIBALL User Manual page 30

-
Operation after driving
1. Ignition switch can turn directly
from " " to "
blue light is out, the vehicle has no
power；
2. To lock the steering head，turn
handlebar to full left, turn ignition
switch knob to "
press downward，then turn to "
position. The blue light is out then the
red light flashes three times then goes
out, the steering head is locked.
3. If the handlebar do not turn
completely left，press and turn ignition
switch cannot turn to "
due to too much
" ， meantime, the
" position and
"
" position
resistance, the
handlebar should be slightly turned until
lock tongue extend into lock hole and
press the button again to perform the
locking action.
4. When unlocking, take the key
with you to turn ignition switch knob to
" " position to unlock.
■
Caution：
at will when driving. This may cause
accident.
■
Lock steering head you must turn
handlebar to full left position.
■
Turn handlebar slightly to ensure
steering head lock up after lock
operation.
■Please confirm that the ignition
switch knob is in"
" " position before you leave.
29
Do not turn ignition switch
" position or