Table of Contents
Advertisement
Displayed message
PLEASE DESCALE YOUR MA-
CHINE.
YOU HAVE ## BEVERAGES LEFT.
REPLACE WATER SOFTNER
FILTER
GENERAL ALARM: REFER TO
USER MANUAL
STORE MILK CONTAINER IN THE
FRIDGE
ASSEMBLE THE SPOUT ON THE
MILK CONTAINER
13. TROUBLESHOOTING GUIDE
Problem
The coffee is not hot.
14 ENGLISH
Possible cause
The machine must be descaled.
The softener filter is exhausted.
The inside of the machine is very
dirty.
The milk container was inserted in
the machine for + 20 min
Request for a milk drink for the
first time
Possible cause
A low coffee temperature is set.
The cups were not preheated.
The machine has cooled down
because some time passed since
the last coffee was made.
The machine must be descaled
Action
Press DESCALE to start descaling
Follow the instructions on the dis-
play and follow the procedure
Follow the instructions on the dis-
play to replace or remove the filter.
Follow the instructions in section
"Water softener filter".
Clean the inside of the machine
thoroughly, as described in the
section "Cleaning". If the message
is still displayed after cleaning,
contact Customer Services.
Remove the milk container from the
machine and place it in the fridge
Follow the instructions on the
display
Solution
Set a hotter coffee temperature in
the menu.
Warm the cups with hot water using
the dedicated key on the display
C5
.
Thrown away the water and
dry carefully the cups.
Heat up the coffee spouts by rins-
ing using the dedicated key on the
C7
.
display
Proceed as described in section
"Des caling". Next, check the
water hardness ("Measuring water
hardness") and make certain the
machine setting match es the local
water supply hardness ("Setting
water hardness").
Advertisement
Table of Contents
