Reset Device - Nokia 6555 User Manual

S e t t i n g s
■ Security
When security features that restrict calls are in use (such as call restriction and
fixed dialing) calls still may be possible to the official emergency number
programmed into your device.
Select Menu > Settings
PIN code request — to set the phone to ask for your PIN code every time the phone
is switched on. Some SmartChip cards do not allow the code request to be turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from your phone
(network service). A restriction password is required.
Fixed dialing — to restrict your outgoing calls to selected phone numbers if this
function is supported by your SmartChip card. When the fixed dialing is on, GPRS
connections are not possible except while sending text messages over a GPRS
connection. In this case, the recipient's phone number and the message center
number must be included in the fixed dialing list.
Security level > Phone
new SmartChip card is inserted into the phone. If you select Memory, the phone
asks for the security code when the SmartChip card memory is selected, and you
want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or
restriction password
Code in use — to select whether the PIN code or UPIN code should be active
PIN2 code request — to select whether the PIN2 code is required when using a
specific phone feature which is protected by the PIN2 code. Some SmartChip
cards do not allow the code request to be turned off.
Authority certificates
into your phone. See "Certificates," p. 51.
User certificates — to view the list of the user certificates downloaded into your
phone. See "Certificates," p. 51.
Security module sett.— to view
or change the module PIN and signing PIN. See also "Access codes," p. 8.

■ Reset device

To reset some of the menu settings to their original values, select
Reset device. Enter the security code. If you have not created a security code, the
phone will prompt you to create one. The names and phone numbers saved in the
address book, are not deleted.
76
> Security and from the following options:
— to set the phone to ask for the security code whenever a
— to view the list of the authority certificates downloaded
Secur. module details, select Module PIN
Menu
request,
> Settings >