Accessory Settings - Nokia 6310i User Manual

To access, press Menu 4-5 (Settings - Tone settings).
Note: Any changes you make in the Tone settings menu will
override the current profile's tone settings. For example, if you
have selected the Nokia tune as your ringing tone in the Normal
profile, then change the ringing tone via the Tone settings menu,
the change is reflected for the Normal profile.

• ACCESSORY SETTINGS

Note: The accessory settings menu is shown only if the phone has
been connected to a Headset, Handsfree car kit or Loopset.
This option allows you to adjust settings used in conjunction with various
accessories, including a Headset, Handsfree car kit, or Loopset.
Press Menu 4-6 (Settings - Accessory settings).
1
Select Headset, Handsfree or Loopset.
2
After selecting the desired accessory, you will have the following options:
Default profile which allows you to select a profile (from Normal,
•
Silent, etc.) to be automatically activated when you connect the
selected accessory. You can also select Current profile as the default
while the accessory is connected.
Automatic answer sets the phone to automatically answer an
•
incoming call after five seconds. If the Incoming call alert is set to
Beep once or Off, automatic answer is not available.
In the Handsfree menu, select Lights to turn the phone lights On
•
(permanently) or on Automatic to turn the lights on for 15 seconds after
a key press. This option is available only when Handsfree is selected.
Under Loopset, select Use loopset to set the loopset in use instead of
•
the headset. Use loopset is visible only after loopset is selected.
[ 59 ]
Settings
4