Sharper Image REFRESH 06 Owner's Manual page 6

SAFE USE WARNING—To reduce risk of fire, electrical shock and injury to
persons, observe the following:
- WARNING: To reduce likelihood of circuit overload, fire and electric shock,
do not operate with a solid state speed device, such as a dimmer control
switch.
- Do not operate any fan with a damaged cord or plug. Discard fan or return
to an authorized service facility for examination and/or repair.
- Do not operate unit if the unit has been dropped or damaged. Do not
use this product if it has a damaged power cord or plug. To avoid risk of
electrical shock, do not attempt to repair or replace parts. Only original
replacement parts may be used. If the power cord is damaged, it must
be replaced by the manufacturer, its service agent, or similarly qualified
persons in order to avoid a hazard. Contact (833.800.8669) or (help@
sihomecomfort.com) for further instructions about replacement and
repair.
- Before plugging power cord into electrical outlet, be sure that all electrical
information on the rating label, including voltage, is compatible with your
outlet's power supply.
- Do not sit or stand on product.
- Never use the cord as a handle or otherwise yank, strain or stretch the
power cord.
- While the product is plugged in, do not insert or allow foreign objects to
enter any input or output opening as this may cause risk of electric shock
or fire, or damage the product.
- A loose fit between wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the product in
this outlet. Contact a qualified electrician to replace loose or worn outlets.
6 English