Advertisement
Operations:
" one time to turn on the thermostat and once more to turn off it;
Start/Stop: Press"
Temperature Setting: Press "6" to decrease the temperature and press"5"to increase it and each press means 1℃
changed;
Cool Mode(F/D/Y Model): Press "M" till "
Heat Mode(F/D/H/Y Model ): Press "M" till " " flashes and the system will confirm it automatically in 5 seconds, H Model
ONLY has Heat Mode;
Vent Mode(F/D Model): Press "M" till "
run according to the speed selected;
Speed Mode(F/D Model): Press "
Under Auto Mode, the fan will change its speed automatically, which means it will run at low speed when the temperature
difference is higher than 1℃ and it will run at high speed, when the temperature difference is higher than 3℃; and it the
difference is equal, DA model will close the motorized valve with fan running at low speed and DB model will close the motorized
valve and the fan as well.
Parameter Setting under Close Mode:
1. Temperature Adjustment:
Applicable only when the temperature is incorrect:
Simultaneously press "M" and " " for 3 seconds till it displays "XX ℃"（"RT"does not show）, and press "5" or "6" to
adjust the temperature to the right degree and the system will confirm it automatically in 5 seconds.
2. Code Setting:
Simultaneously press " " and "M" till "RT" disappears and then press "
thereafter, press "6" and "5" to number them and the system will automatically confirm the codes set(The codes range from 1
to 32).
3. Low Temperature Protection Setting:
Under Close Mode, press "M" for 3 seconds till it displays"00"or"01", then press "5" or "6" to adjust it. "00" means to
disable the function and "01" means to enable the function.
When the function is valid, and under Close Mode, and the room temperature is lower than 5℃, the thermostat will
automatically work under heat mode and when the temperature rises to 7℃, it will close automatically.
HL8001XX-TXX also has other functions as follows:
Sleep Setting: press " " till "
Clock Adjustment: Press " " till "hh:mm" displays with "hh" flashing, then press "5" or "6" to adjust Hour and press " " till
"mm" in "hh:mm" flashes, then press "5" or "6" to adjust Minute, and finally press " " to confirm the setting;
Timing Start Setting: Press " " till " " and "TIMER ON" flash, together with "hh" in "hh:mm" flashing, press "5" or "6" to
adjust Timing Hours, and press " " till "mm" in "hh:mm" flashes, then press "5" or "6" to adjust Timing Minute, and finally press
" " to confirm the setting;
Timing Stop Setting: Press " " till " " and "TIMER OFF" flash, together with "hh" in"hh:mm" flashing, press "5" or "6" to
adjusting Timing Close Hour, and press " " till "mm" in "hh:mm" flashes, then press "5" or "6" to adjust Timing Close Minute,
and finally press " " to confirm the setting;
Cancellation of Timing Start: Press " " till " " and "TIMER ON" flash, together with "hh" in "hh:mm" flashing, press "5" or
"6" to adjust Timing Start Hour to "00", press " " till "mm" in "hh:mm" flashes, then press "5" or "6" to adjust Timing Start
Minute to "00" , and finally press " " to confirm the setting;
Cancellation of Timing Close: Press " " till " " and "TIMER OFF" flashes, together with "hh" in "hh:mm" flashing, press "5"
or "6" to adjust Timing Close Hour to "00", and press " " till "mm" in "hh:mm" flashes, press "5" or "6" to adjust Timing
Close Minute to "00", and finally press " " to confirm the setting.
Note: Please connect all the wires correctly as per the wiring diagram and keep away from water, mud
so as not to spoil the element inside.
" flashes and the system will confirm it automatically in 5 seconds;
" flashes and the system will confirm it automatically in 5 seconds and the fan will
" to select fan speed "
" flashes and press "5" to confirm the setting or press "6" to disable it;
Page 2 of 2
（Hi）,
（Mid）,
（Low） or
" and " ℃" will automatically disappear, and
HaiLin Control
（Auto）;
Advertisement
