Table of Contents
Advertisement
THESE INSTRUCTIONS ARE IMPORTANT!
Reviewing and understanding these instructions prior to installation is a simple way to help prevent improper
installation which can void the warrantee and lead to a visible installation, poor speaker performance, damage to
the speakers, and possible costly repair/refinishing expenses.
INFORM THE CONTRACTOR AND CREW
It is very important that the contractor and wall finishing crew are made aware of the speakers and have reviewed
this document and the installation videos available at StealthAcoustics.com prior to arrival on site.
materials and skills required are typical for drywall finishing this is not a technique the contractor should be expected to know
without first reviewing the installation instructions/videos. Understanding the nuance and limitations of the installation process
ahead of time will result in a great sounding, long lasting and completely invisible installation.
BEFORE INSTALLING SPEAKERS
Plan ahead. Before beginning an installation, review this document and the related installation videos at
StealthAcoustics.com
Consider speaker location. Because of their wide dispersion pattern and invisible nature, Stealth speakers offer a
greater flexibility when placing them within a room. A perfectly symmetrical installation is not required so speakers can
be adjusted to accommodate architectural and structural limitations yet still achieve a balanced sound.
Consider acoustic isolation. Each project will have different acoustic isolation requirements. What will be on the
opposite side of the wall/ceiling from the desired speaker location? Can the speaker be relocated or a back box utilized
to help with sound isolation?
Consider wall finish type. What finish will be used? Stealth speakers can accommodate a variety of finishes and
planning ahead for the desired finish will help achieve optimum results.
Take your time. To achieve a completely invisible installation, time and care must be taken. Joint compound must be
allowed to fully cure for 24 hours between applications to prevent future seam cracking. Inspection and Sanding between
coats of compound will ensure a smooth, seamless finish.
PANEL EXCURSION IN CEILING INSTALLATIONS
When installing the larger 30" format speakers such as the B30g Subwoofer in a ceiling it is important to understand that
there will be some deflection of the face panel downward due to the effects of gravity. The natural excursion of the face panel
is what allows greater bass response in the LineaResponse speakers, but it can become visible in ceiling installations under
some installation and lighting conditions. This deflection is normal and can be mitigated if the joint compound is applied
correctly. Do not float joint compound over the entire speaker face. Joint compound is unnecessary on the speaker face
and adds weight which may further exacerbate any deflection.
Minimum Tools Required
for Speaker Installation
• Stud Finder
• Pencil
• Saw
• Wire Strippers
• Screwdriver (phillips bit)
• Level/Straight Edge
• Amplifier with Audio
Source (for testing)
6
TIPS & BEST PRACTICES
(See page 7)
Minimum Tools Required
for Wall Finishing
• Seam Tape (paper or mesh)
• Joint Compound (all purpose)
*Do not use chemically
curing joint compound.
• Wallboard Knives
• Sander
• Paint Roller
• Primer
• Paint
(See page 17)
(See page 15)
Box
Speaker
Contents
Panels
LR6G
1
LR8G
1
SLR8G
1
LR3G
1
LRX83
1
LRX85
2
B22G
2
B30G
2
Although the
(See page 7)
Shim
Drywall
Quick
Strips
Screws
Start
16
25
1
16
37
1
16
37
1
16
45
1
16
37
1
16
34
1
16
37
1
16
45
1
Spec.
Sheet
1
1
1
1
1
1
1
1
Advertisement
Table of Contents
