Download Print this page

Allo RemoteControl NICE TT1N Instructions

INSTRUCTIONS

NICE TT1N

Memorizing the first transmitter:

As soon as the control unit is powered, 2 long beeps will sound

Within 5 seconds press and hold down button ■ of the transmitter to be memorised (for

approx. 3 seconds)

Release button ■ when you hear the first of the 3 beeps confirming memorization

N.B. If transmitters have already been memorised in the control unit, 2 short beeps will be

heard when it is switched on. This means that the above procedure is not valid and another

memorisation procedure must be used

Visit our Website. www.alloremotecontrol.com

Or:

Press and hold down button ■ of the new transmitter until you hear a beep (after about 5

seconds) then release it

Press button ■ of a previously memorized transmitter slowly 3 times

Press button ■ on the new transmitter again, releasing it when you hear the first of the 3

beeps

N.B. 3 long beeps will sound if memorisation has been successfully completed. 6 beeps will

sound when the memory is full (30 transmitters), telling you the transmitter cannot be

memorised.

Visit our website: www.Alloremotecontrol.com

Table of Contents

Do you have a question about the NICE TT1N and is the answer not in the manual?

Page 1 INSTRUCTIONS NICE TT1N Memorizing the first transmitter: As soon as the control unit is powered, 2 long beeps will sound Within 5 seconds press and hold down button ■ of the transmitter to be memorised (for approx. 3 seconds) Release button ■ when you hear the first of the 3 beeps confirming memorization N.B.
Page 2 Memory deletion: 1. Switch the control unit off and cut the jumper on the weld side of the card 2. Power the control unit and wait for the initial beeps 3. Press and hold down button ■ of a previously memorized transmitter until you hear a beep (after about 5 seconds) then release it 4.
Page 3 Programming the “Working time” 8. Press and hold down button ■ of a previously memorized transmitter until you hear a beep (after about 5 seconds) then release it. 9. Press key ■ again until you hear 4 short beeps (after approx. 5 seconds), then release Press keys ▲...