Clas Ohlson 31-4171 Instructions

Alarm Clock LCD
Product Description
Alarm clock with calendar, light, indoor temperature
and snooze alarm.
Buttons
1. ALM SET – set the alarm
2. ▲ 12/24 – 12/24 hour display
3. ▼ °C/°F – Change temperature unit
4. SET – Set time
5. SNOOZE/LIGHT – Shuts off the alarm
temporarily/Lights up the light
Safety
- Always remove the batteries when the clock
is not used for a longer period of time. The
batteries can start to leak and cause damage to
the clock.
- Never expose the clock to high temperatures,
blows, dampness or moisture.
Getting started
Place batteries inside
The alarm clock requires 2x AAA/LR03 batteries.
1. Open the battery cover on the back of the clock.
2. Insert 2x AAA/LR03 batteries. Make sure
to place the poles correctly according to
the markings on the bottom of the battery
compartment.
3. Put back the battery cover.
Use
Set the clock
1. Push and hold in SET (4) for 3 seconds. The
timer display blinks.
2. Use button (2) and (3) to set the hours.
3. Press SET (4) to set the minutes. The minute
display blinks.
4. Use buttons (2) and (3) to set the minutes.
5. Repeat step 3 and 4 to set the year, month and
date.
The day is adjusted automatically when the correct
date and year is set.
Art.no. 3-47
Set alarm
1. Press and hold in ALM SET (1) for 3 seconds.
The timer display blinks.
2. Use button (2) and (3) to set the hours.
3. Press ALM SET (1) to set the minutes. The
minute display blinks.

4. Use buttons (2) and (3) to set the minutes.
2
Control the alarm
3
- Press ALM SET (1) when the time is displayed
4
to show the set alarm time. Press ALM SET (1)
to return to the time display.
5
Activate the alarm
- Press buttons (2), (3) and (4) at the same time.
The alarm symbol lights up on the display.
Snooze
- When the alarm sounds press any of the
buttons (1), (2), (3) or (4) to temporarily shut
the alarm off for 5 minutes.
Activating the alarm
- Press buttons (2), (3) and (4) at the same time.
The alarm symbol disappears from the display.
2/24 hour display
The clock is showing 12 or 24 hour display.
- Press ▲-12/24 (2) to switch between 12 and
24 hour display.
Change temperature unit
The clock can show current temperature in Celsius
or Fahrenheit.
- Press ▼-°C/°F (3) to change temperature
unit. Selected unit is displayed after the
temperature, "C" (Celsius) or "F" (Fahrenheit).
Care and Maintenance
Clean by wiping with a lightly moistened cloth.
Never use strong solvents or detergents.
Disposal
Follow local ordinances when disposing of this
product. If you are unsure about how to dispose of
this product contact your municipality.
Specifications
Colour:
Size:
Battery type:

Silver
85 x 70 mm
2x AAA/LR03 (not included)