Troubleshooting - Oceanic OCEACCF99W2 Instruction Booklet

Failure
No control lamp
is on.
The temperature
in the freezer is
too high.
The temperature
in the freezer is
too low.
The device
produces a lot of
frost
The lid does not
open.
Vibrations and
unusual noises.
Pour tout autre problème survenant à votre appareil : contacter le Service Après-Vente.
VII. TROUBLESHOOTING
Possible cause
The device is off.
Power outage; fuse
blown or circuit breaker
tripped; taken poorly.
The ventilation grille is
blocked. The lid of the
device is not properly
closed.
Too much frozen food
was placed in the freezer
at the same time.
Too much frost and ice.
The thermostat is set to
too hot.
The thermostat is set to a
temperature that is too
cold.
The lid touches food in
the freezer.
The local is very humid.
Foods give off moisture.
Underpressure in the
device.
The device is not placed
on a flat surface.
The device lacks space.
The baskets or partition
are not fixed.
Check the plug and socket.
Check the power supply.
Check the fuse or circuit
breaker.
Ensure the free flow of air.
Close the lid and wait a few
hours.
Wait a few hours.
Defrost the appliance.
Set the thermostat to a
lower temperature.
Set the thermostat to a
higher temperature.
Move the food and make
sure the lid closes securely.
Ventilate frequently or
carry the freezer in a less
humid room.
Review the food packaging.
Wait 2 or 3 minutes until the
underpressure has
disappeared and try again.
Place the freezer on a level,
stable and horizontal floor.
Remove the freezer from
furniture and appliances
that interfere with it. Check
the stability of loose objects.
EN-20
Solution