Configuration - Nokia 6085 User Manual

S e t t i n g s
Lights — to set the lights permanently On. Select
for 15 seconds after a keypress.
Use TTY > Yes — to use text phone settings instead of headset settings.
Activate the hearing aid mode
Select Hearing aid >
when using a t-coil hearing aid. The
aid mode is active.
If you make an emergency call to 911 while the phone is in the hearing aid mode,
the phone will use as much power as it needs (up to the maximum available) to
connect the call. More information on accessibility can be found at
www.nokiaaccessibility.com.

■ Configuration

You can configure your phone with settings that are required for certain services
to function correctly. The services are multimedia messaging, IM, synchronization,
streaming, and browser. Your service provider may also send you these settings as
a configuration message.
To save the configuration settings received as a configuration message, see
"Configuration settings service," p. 10.
Select Menu > Settings
Default configuration settings
Scroll to a service provider and select
configuration settings of this service provider supports. To set the configuration
settings of the service provider as default settings, select
To delete configuration settings, select Delete.
Activate default in all applications
for supported applications.
Preferred access point
and select Options >
and packet data access point or GSM dial-up number.
Connect to service provider support
your service provider, if this is supported by your service provider.
Device manager settings
software updates. This option may not be available, depending on your phone.
See "Phone software updates," p. 78.
76
T-coil hearing aid mode
> Configuration
— to view the service providers saved in the phone.
Details
— to activate the default configuration settings
— to view the saved access points. Scroll to an access point
Details to view the name of the service provider, data bearer,
— to download the configuration settings from
— to allow or prevent the phone from receiving phone
Automatic
> On to optimise the sound quality
icon is shown when the
and one of the following options:
to view the applications that the
Options
to set the lights on
T-coil hearing
> Set as default.