Nokia 6085 User Manual page 51

M E d i a N e t
Module PIN request
services provided by the security module. Enter the code and select On. To disable
the module PIN request, select Off.
Change module PIN
Enter the current module PIN code, then the new code twice.
Change signing PIN
Select the signing PIN you want to change. Enter the current PIN code, then enter
the new code twice.
See also "Access codes," p. 9.
Certificates
Important: Even if the use of certificates makes the risks involved in remote
connections and software installation considerably smaller, they must be
used correctly in order to benefit from increased security. The existence of a
certificate does not offer any protection by itself; the certificate manager
must contain correct, authentic, or trusted certificates for increased
security to be available. Certificates have a restricted lifetime. If Expired
certificate or Certificate not valid yet is shown even if the certificate should
be valid, check that the current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you
really trust the owner of the certificate and that the certificate really
belongs to the listed owner.
There are three kinds of certificates: server certificates, authority certificates, and
user certificates. You may receive these certificates from your service provider.
Authority certificates and user certificates may also be saved in the security
module by the service provider.
To view the list of the authority or user certificates downloaded into your phone,
select Menu > Settings
The security indicator
between the phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the gateway
and the content server (or place where the requested resource is stored) is secure.
The service provider secures the data transmission between the gateway and the
content server.
50
— to set the phone to ask for the module PIN when using
— to change the module PIN, if allowed by the security module.
— to change the signing PIN code for the digital signature.
> Security > Authority certificates
is displayed during a connection, if the data transmission
or User certificates.