Table of Contents
Advertisement
INSTALLING THE THERMOSTAT
REMOVE OLD THERMOSTAT
Remove the old thermostat from the wall, taking care not to allow the wires
to fall inside the void.
Wrap wires around a pencil or similar object
to prevent them from falling into the wall void.
WARNING:
4
The BDXHTSL1 Thermostat IS NOT COMPATIBLE with supply
voltages above 30 VAC. If the old thermostat is connected
with thick wire and wire nuts or is labeled for voltages
higher than 30 VAC, DO NOT INSTALL the Thermostat.
Hide quick links:
Advertisement
Table of Contents
