Installing The Bdxhtsl1 Smart Thermostat - Black & Decker BDXHTSL1 Installation & Operation Manual

INSTALLING THE THERMOSTAT
There are 5 steps to install the BDXHTSL1 Smart Thermostat.
1. Determine Wiring Configuration
2. Remove Old Thermostat
3. Install Thermostat Mounting Base
4. Connect Wires
5. Attach Display
TOOLS REQUIRED (Not included)
The following tools may be required for installation:
• #1 Phillips or flathead screwdriver
• Power drill with 3/16" bit
• Level
• Smartphone/camera to photograph existing wiring (optional)
• Screwdriver to disconnect wires from existing thermostat.
• Pencil
2
TURN OFF POWER TO HVAC
SYSTEM
Locate the HVAC panel breaker
and turn OFF the system. Before
removing the old thermostat,
initiate heating or cooling by
changing the temperature setting.
Ensure the HVAC system does not
respond.