Black & Decker BDXHTSL1 Installation & Operation Manual
  1. Manuals
  2. Brands
  3. Black & Decker Manuals
  4. Thermostat
  5. BDXHTSL1
  6. Installation & operation manual

Black & Decker BDXHTSL1 Installation & Operation Manual

Smart thermostat
Hide thumbs

Advertisement

Table of Contents

BDXHTSL1 Smart Thermostat
Installation & Operation Manual
Please read before returning this product for any reason.

Advertisement

Table of Contents
loading

Related Manuals for Black & Decker BDXHTSL1

Summary of Contents for Black & Decker BDXHTSL1

  • Page 1 BDXHTSL1 Smart Thermostat Installation & Operation Manual Please read before returning this product for any reason.
  • Page 2 USING THIS MANUAL BEFORE INSTALLING AND USING THE BDXHTSL1 SMART THERMOSTAT, please read these instructions carefully. This manual is intended as a reference guide for the installation, configuration, and operation of your device. Save all instructions in a safe place for future reference.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING: Never modify this product. Damage or personal injury could result. WARNING: • Follow all applicable electrical codes and regulations regarding the installation or replacement of a thermostat in the local jurisdiction.

  • Page 4: Table Of Contents

    IN THE BOX ........... . 1 INSTALLING THE BDXHTSL1 SMART THERMOSTAT ....2 DEVICE OVERVIEW .

  • Page 5: Customer Assistance & Support

    For further information needed on its features, please visit www.ctnovatech.com for frequently asked questions and the electronic manual. ©2021 CT Nova US LLC 4700 Duke Drive Suite 200, Mason, OH 45040, USA IN THE BOX Wall Plate (if required) Mounting Hardware BDXHTSL1 Smart Thermostat with Mounting Plate Installation & Operation Manual...

  • Page 6: Installing The Bdxhtsl1 Smart Thermostat

    INSTALLING THE THERMOSTAT There are 5 steps to install the BDXHTSL1 Smart Thermostat. 1. Determine Wiring Configuration 2. Remove Old Thermostat 3. Install Thermostat Mounting Base 4. Connect Wires 5. Attach Display TOOLS REQUIRED (Not included) The following tools may be required for installation: •...
  • Page 7 INSTALLING THE THERMOSTAT DETERMINE WIRING CONFIGURATION If the BDXHTSL1 Smart Thermostat is being installed in a new system or if wiring changes are required, refer to Appendix A for the wiring configurations and skip to “Install Mounting Plate”. When replacing a thermostat and replication of the existing wiring is desired on the BDXHTSL1 Thermostat, the following applies: •...
  • Page 8 Wrap wires around a pencil or similar object to prevent them from falling into the wall void. The BDXHTSL1 Thermostat IS NOT COMPATIBLE with supply voltages above 30 VAC. If the old thermostat is connected WARNING: with thick wire and wire nuts or is labeled for voltages higher than 30 VAC, DO NOT INSTALL the Thermostat.
  • Page 9 INSTALLING THE THERMOSTAT INSTALL MOUNTING PLATE (with WALL PLATE if required) Note: Use 3/16” drill for wall anchors if no stud is present. Use the included screws and wall anchors (if required) to attach the Mounting Plate to the wall, making sure the wires go through the center opening.
  • Page 10 INSTALLING THE THERMOSTAT ATTACH WIRING To insert a wire, loosen the screw corresponding to the labeled socket and slide the wire into the socket. Once the wire is inserted, tighten the screw snugly. DO NOT OVERTIGHTEN the screws. Pull gently on each wire after the screw is snug to make sure it is secure. Inspect the wires for oxidation and integrity.
  • Page 11 INSTALLING THE THERMOSTAT ATTACH DISPLAY TO MOUNTING PLATE Slide the display over the Mounting plate and the LCD display will illuminate.

  • Page 12: Device Overview

    DEVICE OVERVIEW BDXHTSL1 SMART THERMOSTAT KEYS DESCRIPTION BUTTON DESCRIPTION Change Increase INCREASE Fan Speed Set Point Change Decrease MODE DECREASE System Mode Set Point...
  • Page 13 DEVICE OVERVIEW SPECIAL KEY FUNCTIONS KEYS TIME RESULT Briefly press + and - keys to switch between < 3 seconds Programmable and Non-programmable Thermostat. Hold + and – keys for 3 seconds to lock or unlock 3 seconds key pad. Hold the Fan and Mode keys for 3 seconds to enter 3 seconds or exit the Parameter Menu.

  • Page 14: Display Elements

    DISPLAY ELEMENTS Steady = Wi-Fi and Cloud Server connected Cloud Server/ 1 Flash = Wi-Fi connected, No Cloud connection Internet Connection 2 Flashes = No Wi-Fi or Cloud Server connection Thermostat Lock Displayed when thermostat keys are disabled Indicator Displayed when thermostat schedule Schedule Indicator is enabled.
  • Page 15 Heating/Cooling Modes – Press to change AUTOMATIC CHANGEOVER OFF – The SMARTSTAT – The SMARTSTAT will activate will not activate heating or heating or cooling appliance based cooling* on the room temperature. HEAT – The SMARTSTAT EMERGENCY HEAT – The SMARTSTAT will activate heating displays this with the element to...

  • Page 16: Smart Device Application - Download

    SMART DEVICE APPLICATION The BDXHTSL1 Thermostat is designed for remote operation using a smart device application. Before setting up the thermostat, download the BLACK+DECKER HOME application on your IOS or Android device. After download- ing the application, follow the steps in the BLACK+DECKER Home...

  • Page 17: Thermostat Parameters

    THERMOSTAT PARAMETERS To access the BDXHTSL1 Smart Thermostat menu parameters manually, hold down the Mode and Fan buttons for 3 seconds. When a Menu Code is displayed, use the + and – buttons to choose the desired value. Press Mode ( ) to display Option Values.
  • Page 18 THERMOSTAT PARAMETERS To access the BDXHTSL1 Smart Thermostat menu parameters manually, hold down the Mode and Fan buttons for 3 seconds. The following is a list of the available parameters. PARAMETER CODE DESCRIPTION Conventional 1H 1-Stage Heating Conventional 2H 2-Stage Heating Conventional 1H 1C 1-Stage Heating &...
  • Page 19 THERMOSTAT PARAMETERS PARAMETER CODE DESCRIPTION HP o Changeover valve defaults to Cooling Type HP b Changeover valve defaults to Heating Fahrenheit US Customary System of Temperature Units Temp Unit Celsius Système international Metric Temperature Units Disable Frost When enabled, call for heat will be initiated if Protection room temperature drops below 41.0°F (5.0°C) Enable...
  • Page 20 THERMOSTAT PARAMETERS PARAMETER CODE DESCRIPTION 0.5°F (0.25°C) 1.0°F (0.5°C) Control variable that affects thermostat 1.5°F (0.75°C) Span response time. A larger number slows 2.0°F (1.0°C) response time. 2.5°F (1.25°C) 3.0°F (1.5°C) 2.0°F (1.0°C) Allowable temperature difference, in Auto Deadband 3.0°F (1.5°C) Mode, between heating and cooling set points.
  • Page 21 THERMOSTAT PARAMETERS PARAMETER CODE DESCRIPTION Disable Auto Gradually increases setpoint after setback Recovery Enable Disable Filter warning ( ) displayed after 700 Filter hours of operation Enable Warning To reset the filter warning, select Code 16 Abort power reset Power Reset Confirm power reset Reset Abort reset to factory defaults...

  • Page 22: Manual Operation

    MANUAL OPERATION MODE CHANGE To change the operating mode, press the Mode ( ) button. The following table shows the mode sequence based on the System Type: Mode Change Sequence System Type Sequence Conventional Heating/Cooling Heat Pump Dual Fuel (Gas/Electric) Available Modes Based on HVAC System Setting: System Type ...
  • Page 23 APPENDIX A – SCHEMATIC WIRING The following are schematic wiring diagrams based on applicable system types. Failure to correctly wire the BDXHTSL1 Thermostat could WARNING: result in death or serious injury. The local jurisdiction may require installation by authorized service personnel.
  • Page 24 APPENDIX A – SCHEMATIC WIRING Failure to correctly wire the BDXHTSL1 Thermostat could WARNING: result in death or serious injury. The local jurisdiction may require installation by authorized service personnel. Conventional Furnace/AC 1H/2C (Non-Heat Pump) – 1 Transformer...
  • Page 25 APPENDIX A – SCHEMATIC WIRING The following are schematic wiring diagrams based on applicable system types. Failure to correctly wire the BDXHTSL1 Thermostat could WARNING: result in death or serious injury. The local jurisdiction may require installation by authorized service personnel.
  • Page 26 APPENDIX A – SCHEMATIC WIRING Failure to correctly wire the BDXHTSL1 Thermostat could WARNING: result in death or serious injury. The local jurisdiction may require installation by authorized service personnel. Heat Pump – 1 Transformer...

  • Page 27: Appendix B - Warranty

    APPENDIX B - WARRANTY Three-Year Limited Warranty CT Nova warrants to the original consumer purchaser only that this product and the component parts thereof, will be free from defects in workmanship and materials. CT Nova will, repair or replace, at its sole option and discretion, this product or any defective parts. CT Nova’s liability hereunder shall be limited to repair or replacement of the defective part or parts, and such cor- rection shall constitute a fulfillment of all of CT Nova’s warranties hereunder.
  • Page 28 APPENDIX B - WARRANTY LIMITATION OF REMEDIES AND DAMAGES. REPAIR OR REPLACEMENT AS PROVIDED UN- DER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. CT NOVA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ATTORNEYS’ FEES AND/OR COSTS OF LITIGATION, FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
  • Page 29 APPENDIX C - COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

  • Page 30: Appendix C - Compliance: Fcc/Industry Canada

    APPENDIX C - COMPLIANCE FCC AND INDUSTRY CANADA RF Radiation Exposure statement: This equipment complies with FCC and Industry Canada RF radiation exposure limits set forth for an uncontrolled environment. This equip- ment should be installed and operated with a minimum distance of 20 centimeters between the antenna and all persons.

  • Page 31: Appendix D - Thermostat Specifications

    APPENDIX D - SPECIFICATIONS Model BDXHTSL1 Smart Thermostat Temperature Units °F or °C Operating Temperature 32°F to 122°F (0°C to 50°C) Storage Temperature 14°F to 140°F (-10°C to 60°C) Humidity Range < 90% RH Non-condensing Power Input 18-30 VAC, 60 Hz...

  • Page 32: Trademark Acknowledgement

    TRADEMARK ACKNOWLEDGEMENT BLACK+DECKER® and the BLACK+DECKER Logo are trademarks of the BLACK+DECKER Industrial Tool Co., or an affiliate thereof and are used under license. The color scheme is a trademark for BLACK+DECKER power tools & accessories. © 2020 BLACK+DECKER, U.S. & Canada Only Product Distributed by: CT Nova US LLC 4700 Duke Drive Suite 200, Mason, OH 45040, USA...

Table of Contents