Prolux P-ML 350 Original Operating Instruction page 5

Original operating instruction - Multi function lamp P-ML 350
Work lamp attachment
Mode
Illuminant
Material
Lumen
Luminous range
Protection class
Battery
Operating time
Charging time
Charging device
Flexible inspection lamp attachment
Mode
Illuminant
Material
Lumen
Luminous range
Protection class
Battery
Operating time
Charging time
Charging device
Not permitted
- Do not charge the unit in a damp environment. There is a risk of short circuits.
- Do not use the unit near explosive substances such as petrol or gas.
- Never stare directly into the LED. There is a risk of glare and permanent damage to the eyes.
- Do not disassemble the unit. Repair may only be carried out by the manufacturer.
Organisational measures and safety
- Defective devices must not be used or charged.
- Only charge the unit in a temperature range of 0°C to 35°C and observe the permissible operating
temperature range of -20°C to 40°C. Failure to observe this instruction may result in short circuits, damage
to the battery and intense heat generation. In addition, the service life of the battery may be considerably
shortened.
- Only use the provided charging cable.
High
5W COB LED Chips
Aluminium + ABS
350
25 m
IP54
1 x 18650, 3,7 V, 2200 mAh
1,5 h
4 h
5 V, 1 A / 5 V, 2 A
High
XPE 3W LED
Aluminium + Rubber
180
85 m
IP54
1 x 18650, 3,7 V, 2200 mAh
2 h
2,5 h
5 V, 1 A / 5V, 2 A
English
Low
175
12 m
2,5 h
Low
90
50 m
10 h
5