Download Print this page

EAW MKC Series Instructions Manual page 8

Hide thumbs Also See for MKC Series:

Advertisement

MKC Series
c. Confirm all hardware is tight.
d. For weather protected applications, confirm all sealants were applied properly.
6. Maintenance of an MKC Series U-Bracket installation
a. WARNING: Not following Maintenance instructions could result in equipment damage,
serious injury or death.
b. Maintenance should only be performed by an experienced technician.
c. As with any professional loudspeaker system, routine maintenance must be conducted in
order to ensure the longevity and safe, consistent performance.
d. Inspect the MKC Series U-Bracket for corrosion and other damage. U-brackets with
visible damage should be replaced and discarded.
e. Inspect hardware securing the u-bracket to the mounting surface for corrosion or
looseness. Tighten loose hardware and consider installing hardware locking methods.
Replace and discard corroded hardware.
f. Inspect hardware mounting the MKC Series loudspeaker to the u-bracket for corrosion or
looseness. Tighten loose hardware. Replace and discard corroded hardware.
g. For weather protected applications (using MKC-WP Series Loudspeakers), inspect
hardware sealants for cracking or gaps in sealant. Replace damaged sealant with user-
supplied, waterproof, non-hardening, non-locking sealant per the sealant's instructions.
Failure to do so could result in water ingress and damage to the loudspeaker.
h. Clean the MKC Series U-Bracket and MKC Series Loudspeaker with a dry cloth.
7. Dismantling the MKC Series U-Bracket installation
a. WARNING HEAVY LIFTING – Fully support the weight of the MKC Series Loudspeaker.
Using a 3mm & 6mm Allen wrench, remove the screws at the mounting and angle lock
points. Carefully lower the loudspeaker to the ground.
b. Support the weight of the MKC Series U-Bracket. Remove the mounting hardware
securing the u-bracket to the mounting surface. Carefully lower the u-bracket to the
ground.
c. Discard all damaged components.
EU Declaration of Conformity
EAW North America Inc hereby declares that this device is in compliance with Directive
2006/42/EC
A copy of this EU Declaration of Conformity is available at
660-wpfd-certifications
U-Bracket Instructions
Tel 800 992 5013 / +1 508 234 6158
https://eaw.com/downloads/#142-
|
www.eaw.com
8

Advertisement

loading

This manual is also suitable for:

Mkc-wp seriesMkc80Mkc120