メ
Displaying the maintenance information
Press "MENU" switch.
⇒
The display changes to the "Main menu" screen.
Press "F2 ( )" or "F3 ( )" switch
till the display changes to the
"Maintenance information" mode.
4
Press "F4 (Select)" switch.
[In case of TDJS]
⇒
"Total operation time" is displayed.
Display of Maintenance required
・If the operation time or number of
operations reaches the Maintenance
required time on each device, this
screen (Right gure) is displayed for
10 seconds after the start of
operation of the refrigeration unit.
・Where there is any part requiring
maintenance, if you press "F4 (Next)"
switch after the display of Step
above on the Maintenance informa-
tion screen, the part requiring
maintenance is displayed.
0
・If you press "F2 (Reset)" switch after
replacing the part, the operation time and the number of START/STOP cycles
are cleared.
Maintenance information
RUN/STOP
Total operation time1/2120hr
Back
DEFROST
PRESET
F1
Next
F2
F3
F4
Main menu
▲
Alarm
Maintenance information
▼
Language
Back
F1
F2
Maintenance information
Total operation time1/2120hr
Back
F1
F2
Maintenance required
Maintenance information
CF1 operation time/****hr
Back
Reset
F1
F2
- 00 -
- 28 -
4 初期設定
MENU
▲
▼
Select
F3
F3
* "Next" is displayed only
when there is any item
which can be displayed.
F3
F4
*
Next
F4
Next
F4