Cooper UTLD Installation Instructions Manual

IB516005EN
Installation Instructions – UTLD
Directives d'installation – UTLD
Instrucciones de instalación – UTLD
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance.
WARNING
Risk of Fire/Electric Shock. If not qualified, consult an
electrician.
WARNING
Risk of Electric Shock – Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Personal Injury – Fixture may become damaged
and/or unstable if not installed properly.
- Do not mount luminaire within 6" of a combustible
surface.
- Do not handle luminaire by the glass. Do not touch
LEDs.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
General: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention
of the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the
housing to assure you have received the correct material.
Safety: This fixture must be wired in accordance with the National Electrical Code and applicable local codes and ordi-
nances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under
installation section.
APPLICATIONS: This lighting fixture is designed for outdoor lighting services, and should not be used in area of limited
ventilation or inside high ambient temperature enclosures. It must be stored in a dry location prior
to installation. Do not expose lighting fixture to rain, dust or other environmental conditions prior to
installation and insertion of photo control or shorting cap (if so equipped). Do not install the fixture near
combustible materials or locate next to airflow blocking surfaces within 6 inches. Best results will be
obtained if installed and maintained according to the following recommendations.
WARNING
Risk of Burn – Disconnect power and allow fixture to
cool before servicing.
N ote: These instructions do not claim to cover all
details or variations in the equipment, procedure,
or process described, nor to provide directions
for meeting every possible contingency during
installation, operation or maintenance. When
additional information is desired to satisfy a
problem not covered sufficiently for user's purpose,
please contact your nearest representative.
This lighting fixture has been shipped complete
N ote:
with one of several mounting options. Please follow
the installation instructions specific to the catalog
part that you ordered.
Care must be taken not to set lighting fixture down
N ote:
on optical lenses or lift the fixture in the lens area.
N ote: Specifications and dimensions subject to change
without notice.
Brand Logo
reversed out of
black
INS # INS #