Data Or Fax Calls; Data Transfer; Call Summary; Ringing Tone For No Caller Id - Nokia 3155 User Manual

In the standby mode, when you enter + (press * twice) at the beginning of a
phone number, your device automatically inserts the international dialing prefix
that you have stored after you press the call key. See "Insert dialing codes," p. 35.

Data or fax calls

Data and fax calling is a network service. See "Network Services," p. 5. If your
wireless service provider supports this feature, you can set up the device to send
or receive data and fax calls with a terminal, such as a PDA or PC, connected.
For better performance during data calls, place the device on a stationary surface.
Do not move the device by holding it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide
which can be downloaded from the Nokia website at http://www.nokia.com/us.
1. In the standby mode, select
Incoming data/fax call
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
2. When finished with receiving the fax or data call, repeat steps 1 and 2, and
select Normal.

Data transfer

You can view the transmission speed when sending or receiving data and fax calls.
In the standby mode, select
display > Graphic or Off.

Call summary

Your device can display the time spent on a call when you hang up. In the standby
mode, select Menu

Ringing tone for no caller ID

You can select a different ringing tone for calls received with no caller ID.
In the standby mode, select
On or Off.
Menu >
and one of the following options:
Menu > Settings
> Settings > Call >
Menu > Settings
Settings > Call > Data/fax calls
> Call > Data/fax calls
Call summary > On
> Call > Ringing tone for no caller ID
S e t t i n g s
>
> Data rate
or Off.
>
57