Sauder Orchard Hills 418649 Instruction Booklet page 9

Step 4
Fasten nine ANGLE BRACKETS (27G) to the LEFT END (B)
å
and HUTCH ENDS (C and D). Use nine GOLD 9/16" LARGE
HEAD SCREWS (5S).
Fasten the MOLDINGS (W and X) to the ENDS (B, C, and D).
å
Use nine GOLD 9/16" LARGE HEAD SCREWS (5S) through
the ANGLE BRACKETS and into the MOLDINGS.
NOTE: There are no pre-drilled holes in the MOLDINGS. The
å
SCREWS will tighten into the grooves.
GOLD 9/16" LARGE HEAD SCREW
(18 used in this step)
www.sauder.com/services
5S
These edges
should be even.
27G
These edges
should be even.
X
D
W
418649
(9 used)
27G
C
X
27G
B
Page 9