Advertisement
Step 18
1
D16
Q
Groove
Insert the DRAWER SIDES (D16 and D17) at an angle
å
into the slot at each end of the DRAWER FRONT (Q).
3
Fasten the DRAWER BACK (D152) to the DRAWER
å
SIDES (D16 and D17). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D956) inserts into
å
the groove of the DRAWER BACK (D152).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D17
D152
D16
D956
VIEW THE T-LOCK BOX VIDEO
2
D16
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D956) into the grooves in the
å
DRAWER SIDES (D16 and D17) and DRAWER FRONT (Q).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D17
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D956
D17
Q
30S
(4 used in this step)
Advertisement
