Advertisement
Step 19
Insert a SLIDE CAM (10A) into the large holes in the
å
DRAWER SIDES (D16 and D17).
Fasten the DRAWER RIGHT (35GC) and DRAWER
å
LEFT (35GD) to the DRAWER SIDES (D16 andD17). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through
holes #1 and #3.
NOTE: The screw head in the CAM must be visible
å
through the slotted hole in the SLIDE.
Fasten the PULL (123K) and PULL MOUNTS (121K) to the
å
DRAWER FRONT (Q). Use two SILVER 3/4"
MACHINE SCREWS (20S).
2
3
121K
123K
Page 24
Roller end
1
D17
Q
121K
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
(2 used for the PULL and PULL MOUNTS)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D16
2
3
3S
418649
SILVER 3/4" MACHINE SCREW
10A
Roller end
1
www.sauder.com/services
20S
Advertisement
