Menu Functions; Messages - Nokia 1600 User Manual

M e n u f u n c t i o n s

4. Menu functions

In the standby mode, select
Exit or Back to exit the current level of menu. Press the end key to return to the
standby mode directly.

■ Messages

Create a message
Your device supports the sending of text messages beyond the
character limit for a single message. Longer messages will be sent as a series of
two or more messages. Your service provider may charge accordingly. Characters
that use accents or other marks, and characters from some language options like
Chinese, take up more space, limiting the number of characters that can be sent
in a single message.
The number of available characters/the current part number of a multipart message
is shown on the top right of the display, for example, 902/1.
To send a message, the phone number of your message center has to be saved in
the phone. See "Message settings," p. 20.
1. In the standby mode, select
2. Write the message. The number of available characters and the current part
number are shown on the top right of the display.
3. When the message is complete, select
phone number, and select OK.
You can send the message to several people if you have saved them in your
contact list. (See "Contacts," p. 22.) Select
to many, scroll to the first recipient, and select OK. Repeat this for each recipient.
When you have finished, select Done.
To send a message to a predefined distribution list, select
options > Send to
lists," p. 20.
Note: When sending messages, your device may display
This is an indication that the message has been sent by your device to
the message center number programmed into your device. This is not
an indication that the message has been received at the intended
destination. For more details about messaging services, check with your
service provider.
18
Menu and the desired menu and submenu. Select
Menu > Messages
list. For details about distribution list, see "Distribution
> Create message.
Options > Send, enter the recipient's
Options > Sending options
Options
> Send
> Sending
Message Sent.