Touch Tone Strings - Nokia 1220 User Manual

Change 1-touch dialing numbers
1 At the start screen, select Names > 1-touch dialing.
2 Scroll to the key you want to change and select Options > Change.
3 Scroll through the phone book and select the new number.
Erase 1-touch dialing numbers
1 At the start screen, select Names > 1-touch dialing.
2 Scroll to the key you want to erase and select Options > Erase > OK.

• TOUCH TONE STRINGS

Your phone allows you to create special sets of numbers known as touch tone
strings which will dial a series of digits after a "wait" or a "pause." For example,
you can program your phone to send your account number while you are banking
by phone.
You must be in the
as usual. When you want to insert the special characters, press the Star key
repeatedly to switch among *, +, p, w characters.
Note: Use caution when sending confidential information if voice privacy
is not active.
p Creates a pause when a number is dialed. The numbers you enter after this special
character are automatically sent as touch tones after a 2.5-second pause.
w Creates a wait when a number is dialed. Your phone waits for you to press the
Left selection key before it sends the number as touch tones.
* Sends command strings to the network. Contact your service provider for details.
+ Links a 1-touch dialing number to a number in the phone book.
Set manual touch tones
1 From the menus, select Settings > Phone settings > Touch tones > Manual
touch tones.
2 Select one of the following options:
Continuous—Sound the tone for as long as you press and hold a key.
Fixed—Set the tone to a fixed length, regardless of how long you press a key.
Off—Turn off the tones. No tones are sent.
mode to enter these characters. Enter the numbers
36 Copyright © Nokia 2003