How To Use The Microwave - Russell Hobbs RHMAF2504B User Manual

HOW TO USE THE MICROWAVE

Turn on the power
Insert the plug into a suitable 13amp mains socket.
Note: Make sure the voltage is the same as on the rating label located on the
back of the microwave (do not use extension cables or mains socket
adaptors.)
The microwave oven will flash and beep.
Setting the clock (24 hour)
For example, if you want to set the time to 08:30 (am:)
1. Press the "Clock/Timer"
2. Turn the "Time/Weight/Auto Menu" dial
'08:'.
3. Press the "Clock/Timer" button
4. The display will show '8:00'. Set the minutes by turning the
"Time/Weight/Auto Menu" dial
5. Press the "Clock/Timer" button
The clock is now set and the colon will continue to flash.
Note:
• If the clock is not set, the microwave will not function when powered.
• During the process of clock setting, if you press "Stop/Clear", the oven
will return to the previous setting, such as back to hours, from the
minutes selection.
•
After step 4, if
minutes, the microwave will go back to the previous status
automatically.
button.
to confirm.
clockwise until the display shows '08:30'.
to confirm.
"Clock/Timer" button
the
20
The oven will display "0:00"
clockwise until the display shows
isn't pressed within 5