Summary of Contents for Monarch Water SCALEOUT ADVANCE SA-15
Page 2
/ GENERAL DIRECTIONS FOR USE • To be used with potable water only and with pH levels of 6.5 to 9.5. • This appliance should only be used for treatment of water which is compliant with the Drinking Water Regulations. •...
Page 3
/ PREPARING YOUR SCALEOUT ADVANCE 1. Undo the housing sump from the head. 2. Remove the cartridge and take it out of its packaging. 3. Lubricate the O ring at the top of the bowl with grease provided. 4. Insert the cartridge back in to the housing with the large black washer at the top. The cartridge should sit in the middle of the housing.
Page 4
/ MAINTENANCE • Before opening: turn off the water mains and open a tap to release the water pressure. • If the Scaleout Advance is not in regular use, it is important to flush the cartridge via the kitchen cold tap for 5 minutes prior to use elsewhere. •...
Page 5
/ WARRANTY Your Scaleout Advance comes with a 5 year parts and 2 year labour warranty, please go to monarchwater.co.uk/warranty to register or scan the QR code below: This warranty has the following conditions, and is not covered by the following; 1.
Page 6
/ HINTS & TIPS 1. Helping your kettle last longer; Your kettle may still have some light, soft scale deposits, this is normal and can be kept to a minimum by running the tap for a few seconds prior to filling. The soft scale deposits are due to the kettle taking the water to boiling point and will not happen elsewhere throughout your system.
Page 7
/ CARTRIDGE CHANGE TABLE Please ensure your Scaleout Advance cartridge is changed every 12 months. You can contact our Sales Team on +44 (0) 1986 784759 (opt 1) to order a new cartridge. Quote codes; SA-15RC, SA-22RC, SA-28RC, SA-LCRC depending on your Scaleout Advance model.
Need help?
Do you have a question about the SCALEOUT ADVANCE SA-15 and is the answer not in the manual?
Questions and answers