Related Manuals for Parametric PCR2-EU868-ODS
Summary of Contents for Parametric PCR2-EU868-ODS
- Page 1 QUICKSTART GUIDE LoRaWAN™ Solar Radar People Counter Outdoor PCR2-EU868-ODS PCR2-US915-ODS PCR2-AU915-ODS PCR2-AS923-ODS PCR2_ODS_Quickstart_Guide_en-055...
-
Page 2: What Is In The Box
What is in the box Please check for the following content in your box. Optional 1. Solar Panel 18V 2. MT40 Pole Mount 3. Extension Cable 4. Solar Panel Bracket Device 5. PCR2-ODS www.parametric.ch/product/pcr2-ods... - Page 3 • Carefully open the enclosure while making sure not to yank the cables connecting the two electronic parts in the top and the bottom of the casing. • Connect the sensor to your Computer with a USB Cable using the Config Port. www.parametric.ch/product/pcr2-ods...
- Page 4 Clicking the three dots (2) sets the default settings. Extended Warranty Available leads you to the Parametric Store to upgrade your device’s warranty. Re-Power the device to start the Join procedure. After...
- Page 5 Set to zero to disable Linkcheck completely. DevEUI, AppEUI, AppKey Enter your LoRaWAN Keys Payload Type Choose between Parametric and Cayenne LPP compatible payload formats. Overview of Radar Settings Autotune If enabled, the sensor will measure up to 20 objects passing by.
- Page 6 Initial charge is indicated by a fast-blinking Battery Gauge LED (V4.1.0 and newer). 01 Battery Gauge LED After pressing the user button, the Battery Gauge LED will display the following states for about 30s. LED Status Description Battery Empty Blinking Battery Partially Charged Battery Full www.parametric.ch/product/pcr2-ods...
-
Page 7: Installation
• Check for the two direction PCR2- ODS LEDs under the lid to turn on. Both LEDs blink while the device connects to the LPWAN. • Fix the solar panel bracket to the back of the solar panel using the provided flat washers and nuts. www.parametric.ch/product/pcr2-ods... - Page 8 Solution a) : Wait until the power goes on. Solution b) : Connect a power supply 12V / 1A to the solar panel terminals to charge the battery manually. • WPMB Universal Mounting Bracket can be attached with 2 screws. www.parametric.ch/product/pcr2-ods...
- Page 9 Wall mounting (recommended) 1.2…1.4m (4…5 feet) above floor Installation height: Installation direction: Device surface parallel to peopleflow 6…10m depending on object size Detection range: Separation angle: 40° (Distance between persons) Avoid: Side-by-side walking Groups Too close to each other www.parametric.ch/product/pcr2-ods...
- Page 10 0.5…4m above peoples heads Installation height: Installation direction: Heading down, LEDs in line with direction of movement Separation angle: 40° (Distance between persons) Avoid: Side-by-side walking Groups Too close to each other Too wide entries (detection angle is 34°) www.parametric.ch/product/pcr2-ods...
- Page 11 Counting functionality can be checked by 2 direction leds. • RTL LED blinks when object detected from right • LTR LED blinks when object detected from left If both LEDs are blinking, the device is trying to connect to the LPWAN. www.parametric.ch/product/pcr2-ods...
- Page 12 EU Declaration of Conformity Parametric GmbH declares that the following equipment is compliant to the RoHS (2015/863/EU) and Radio Equipment Directive (2014/53/EU) Model: PCR2 Product Description: LoRaWAN™ Radar People Counter bidirectional Conformity is assured by compliance to the following Standards: EN 60950-1: 2006+A11: 2009+A1:2010+A12:2011+A2:2013 (2014-01-02) EN 55032:2012+AC:2013 (2017-03-05);...