What is in the box Please check for the following content in your box. Optional 1. Solar Panel 18V 2. MT40 Pole Mount 3. Extension Cable 4. Solar Panel Bracket Device 5. TCR-HSS or TCR-LSS www.parametric.ch/product/tcr-s...
Page 3
• Connect the sensor to your Computer with a USB Cable using the Config Port. • Use PPX to set your LoRa keys: https://ppx.parametric.ch/ www.parametric.ch/product/tcr-s...
Page 4
Clicking the three dots (2) sets the default settings. Extended Warranty Available leads you to the Parametric Store to upgrade your device’s warranty. Always press ‘Save’ after changing settings. www.parametric.ch/product/tcr-s...
Page 5
Send uplinks with ACK requests. LinkCheck Interval After this interval, send LinkCheckReq with next uplink. Set to zero to disable Linkcheck completely. DevEUI, AppEUI, AppKey Enter your LoRaWAN Keys Payload Type Choose between Parametric and Cayenne LPP compatible payload formats. www.parametric.ch/product/tcr-s...
Page 6
If enabled, the sensor will measure up to 20 objects passing by. Then the radar sensitivity will be set automatically. Speed Class 0 … 3 Adjustable speed classes ranging 80km/h … 120km/h. Radar Sensitivity [%] You can set the radar module from 10% (fairly sensitive) to 100% (very sensitive). www.parametric.ch/product/tcr-s...
Page 7
Initial charge is indicated by a fast-blinking Battery Gauge LED (V4.1.0 and newer). 01 Battery Gauge LED After pressing the user button, the Battery Gauge LED will display the following states for about 30s. LED Status Description Battery Empty Blinking Battery Partially (1-99%) Charged Battery Full www.parametric.ch/product/tcr-s...
• Check for the two direction LEDs under the lid to turn on. Both LEDs blink while the device connects to the LPWAN. • Fix the solar panel bracket to the back of the solar panel using the provided flat washers and nuts. www.parametric.ch/product/tcr-s...
Page 9
Solution a) : Wait until the power goes on Solution b) : Connect a power supply 12V / 1A to the solar panel terminals to charge the battery manually. • WPMB Universal Mounting Bracket can be attached with 2 screws. www.parametric.ch/product/tcr-s...
TCR Solar-Powered are 1D sensors measuring Traffic along a virtual line. The device can be directed horizontally or with a tilt up to -40°. Installation scenarios Counting bicycles: Place at saddle height Counting people: Place at hips height Counting cars: Place at door handle height www.parametric.ch/product/tcr-s...
Page 11
Counting functionality can be checked by 2 direction LEDs. • RTL LED blinks when traffic detected from right • LTR LED blinks when traffic detected from left If both LEDs are blinking, the device is trying to connect to the LPWAN. www.parametric.ch/product/tcr-s...