Advertisement
Advertisement
Table of Contents
Related Manuals for Eleshop LABPS3060SM
Summary of Contents for Eleshop LABPS3060SM
- Page 1 0-30V 0-60A / 0-60V 0-30A operating manual Model: LABPS3060SM / LABPS6030SM...
- Page 2 1. Operation • Connect the power cable to 230V mains. • Check the fuse is on, red lever in up position • Press the ON button • The unit display shows the selected voltage on upper line, SEI on lower line. The output is at 0V, disabled still.
- Page 3 3. Programming a single memory • Press MEMORY (The output drops to 0V during programming) • Display shows a voltage and EPO (programming state) • Press UP or DOWN to select the voltage to program. • Press the memory position to program, for example M2 •...
- Page 4 4. Quick reference card Change live voltage: • Short press UP or DOWN to change 0.1V • WARNING: DO NOT hold UP or DOWN pressed too long, setpoint runs away uncontrolled! Change voltage by programmed setpoint • Press OUTPUT: Output voltage drops to 0V (display shows SEI on lower line) •...
Need help?
Do you have a question about the LABPS3060SM and is the answer not in the manual?
Questions and answers