Page 1
QM33120WDK1 Quick Start Guide Introduction The Qorvo® QM33120WDK1 is a development kit to evaluate the capabilities of the low power low cost QM33110W and QM33120W UWB transceivers. It includes two different shields (AoA and non-AoA) plugged over two Nordic nRF52840 DK evaluation boards.
Page 2
DK has two switches that define the power supply for the board. When the kit is received, all switches are in the working position. Please refer to QM33120WDK1 User Guide document for further information. QM33120WDK1 Setup nRF52840 DK boards are shipped preprogramed.
Page 3
Quick Start Guide Fig. 1.3: QM33120WDK1 evaluation set-up Ranging and AoA Evaluation Install QorvoOne GUI software included in the package and start the application. The boards will be detected and displayed on the main screen. For AoA evaluation, ensure that the QM33120WEVB (the one with the dual antenna) is configured as initiator.
Need help?
Do you have a question about the QM33120WDK1 and is the answer not in the manual?
Questions and answers