Table of Contents
Advertisement
CONNECTIONS
6. High-Output Flasher to the Flasher Outputs
6
Connect the mini-plug end of a Niles High-Output
Flasher, Model IRC-1P (FG00932), to the Flasher Output
labeled ALL. Strategically position the IRC-1P to provide
IR transmission to all source components. It adheres with
a Velcro mounting system (included).
SOURCE-COMPONENT HOME
SYNCHRONIZATION SIGNALS
7. 12V Home Theater Sync to Home Theater Sync Input
7
Connect the 12V Home Theater sync signal to the Home
Theater sync input with a mini-plug.
12V
CONTROL SIGNALS
8. 12V Control Outputs to Voltage-Triggered Devices
8
The 12V control outputs, Main, and Zones 4, 5, and 6
connect to the trigger input of a voltage-activated device
(i.e., Niles AC-3) with the mini-plug end of a Niles
Accessory Cable (FG00724).
HOME
THEATER CONTROL SYSTEM
9. IR Output from a Home Theater Control System to the
9
IR Input
Connect a Home Theater Control System to the IR Input of
the ZR-8630AV with the mini-plug end of a Niles
Accessory Cable (FG00724).
AM/FM ANTENNAS
0. AM Loop Antennas
10
Connect the bare-wire ends of the
(included) to the spring-loaded AM and GND terminals
on the ZR-8630AV. Then position and mount the
antennas for proper reception.
1. Coaxial Cables to FM Antenna Assembly
11
Connect the F-connectors on the two male-to-male
coaxial cables (included) to the two female coaxial F-
connectors on the ZR-8630AV, and to the signal splitter's
two female coaxial F-connectors (labeled OUT).
1. Signal Splitter
12
The signal splitter divides the signal from the FM Dipole
Antenna to supply both FM tuners in the ZR-8630AV.
3. FM Dipole Antenna
13
Connect the male coaxial F-connector of the FM Dipole
Antenna (included) to the signal splitter's single female
coaxial F-connector (labeled IN). Then position and
mount the antenna for proper reception.
THEATER
AM Loop Antennas
50
SPEAKERS
1. Zones 1-6
14
Use Niles no-strip connectors to attach wires from the
ZR-8630AV to the speakers in the listening zones.
1.
Zone
Video Outputs
15
Six RCA
jacks provide zoned output connections for TVs
and video displays.
PREAMPLIFIER ZONE OUTPUTS
1. Zones 1-6 (4-6 set to Variable Mode)
16
For more power in a zone, connect Individual Zone
Preamplifier Outputs 1-6 to an external amplifier with
male-to-male
RCA audio
Configurations 8 and 9 for more details.)
1. Zones 4-6 Set to Fixed Mode
17
For more rooms/power in a zone, connect Individual
Zone Preamplifier Outputs 4-6 (set to fixed output mode)
to an external amplifier with male-to-male RCA audio
cables. (See Configuration 10 for more details.)
KEYPAD MODULES
1. Keypads to Keypad Inputs for Zones 1-6
18
Connect the keypads to the zoned keypad inputs with
four-pair twisted cable terminated with male RJ-45 plugs.
(See page 47, Terminating Four-Pair Twisted Cable, for
more information.)
SYSTEM
EXPANSION
1. System Expansion Input to System Expansion Output
19
Connect multiple
ZR-8630AV units with four-pair
twisted cable, terminated with male RJ-45 plugs, using
the system-expansion input and output terminals. Make
connections from the input of one ZR-8630AV to the
output of another, and so on. (See page 47, Terminating
Four-Pair Twisted Cable, for more information.)
AC POWER
1. Removable AC Power Cord
20
Connect the removable
the ZR-8630AV) to the power-cord socket and to an AC
power outlet.
cables.
(See
System
AC power cord (included with
Hide quick links:
Advertisement
Table of Contents
