TaoTronics TT-BH22 - ANC Wireless Stereo Headphones Manual

Product Diagram

1. ANC LED Indicator
2. ANC ON / OFF Button
3. 3.5mm Audio Port
4. Multifunction Button
5. LED Indicator
6. Volume + / Next
7. Volume - / Previous
8. Microphone
9. Micro USB Charging Port

Package Contents

• 1 x TaoTronics Active Noise Cancelling Wireless Stereo Headphones
• 1 x USB Charging Cable
• 1 x 3.5mm Audio Cable
• 1 x Carrying Case
• 1 x User Guide

How to Use

Charging

1. Connect the charging port to any USB charging adapter or active computer USB port.
2. Charging will start automatically with the LED indicator turning red.
3. The headphones are fully charged when the LED indicator turns blue.

Note:

• Make sure the battery is fully charged before putting the headphones away for storage.
• Charge the headphones at least once every 3 months when not using for a long time.

Pairing

1. Make sure the headphones and your Bluetooth^® device are next to each other (within 3 feet / 1 meter).
2. The first time you use the headphones, press and hold the Multifunction Button until the LED indicator flashes red and blue alternately. Now the headphones are in pairing mode.
3. Activate Bluetooth^® on your phone and search for nearby Bluetooth^® connections. Find "TaoTronics TT-BH22" in the search results and connect. Once connected, the LED indicator will flash blue.

Note:
If the headphones cannot pair with your Bluetooth device, clear the pairing history as below:

1. Turn on the Bluetooth headphones and bring it into pairing mode, the indicator will flash red and blue alternatively.
2. Press and hold the Volume + / - Buttons at the same time for 7 seconds until the LED indicator flashes purple once and 2 beep sounds are heard.
3. You can just pair the headphones just like when they are new.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download TaoTronics TT-BH22 - ANC Wireless Stereo Headphones Manual