Luxen Home WHF1603 Instruction Manual

Dk800

Advertisement

Product Name:
Brown Resin Tree Farmhouse Pots Outdoor Fountain with LED Lights
SKU #:
WHF1603
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of
safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts. If any
parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Description
Fountain
Pump w/ Adapter
Compatible Pumps for this fountain:
Pump Model No.
JR350/LED
Tools required for assembly: No tools are required for assembly.

ASSEMBLY INSTRUCTIONS:

1. Unpack the contents of the box and check to make sure that all items are accounted for and in good condition.
2. Remove the pump from the package and untie the power cord.
4. From the opening at the back of the fountain, insert the water supply tube into the pump outlet ①. Connect the pump
3. Select a flat, level surface for the assembly and final location of your fountain.
adapter cord to the LED cord and twist it to tighten the connection ②. Place the pump upright in the back of the
5. Connect the power cord to the transformer and twist it to tighten it ③.
fountain opening.
6. Add clean water into the reservoir. The water level should be approximately 30mm lower than the edge of the reservoir.
Ensure the pump in your fountain is completely submerged in the water
7. Connect the power cord from the pump to a properly grounded, grounding-type receptacle (GFCI)
8. If installed properly, water flow in the fountain will begin shortly.
9. Adjust the flow rate (if applicable) to the maximum (+) position. If necessary, readjust the flow rate to the desired level
(remember to always disconnect from the power source before handling the pump).
10. Please do not use the electrical plug during wet weather conditions. Please note: On first use, there may be air in the
pump. It may take several minutes until all the air escapes.
Quantity
1
1
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.
.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WHF1603 and is the answer not in the manual?

Questions and answers

Summary of Contents for Luxen Home WHF1603

  • Page 1 Product Name: Brown Resin Tree Farmhouse Pots Outdoor Fountain with LED Lights SKU #: WHF1603 Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
  • Page 2 Instruction Manual SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for power units. Product Name: Brown Resin Tree Farmhouse Pots Outdoor Fountain with LED Lights SKU #: WHF1603 Note: The above diagram is for illustrative purposes only.
  • Page 3 Product Name: Brown Resin Tree Farmhouse Pots Outdoor Fountain with LED Lights SKU #: WHF1603 MAINTENANCE OF YOUR PUMP: Keep the water clean – clean water will prolong the useful life of your pump. •...
  • Page 4 Product Name: Brown Resin Tree Farmhouse Pots Outdoor Fountain with LED Lights SKU #: WHF1603 WARNINGS: To reduce the risk of electric shock, connect only to a properly grounded, grounding-type receptacle. • To reduce the risk of electric shock, use the pump only for portable self-contained fountains no larger than 5 feet in any •...

Table of Contents