Buffalo FB864 Instruction Manual page 12

EN
7. End of Cook Cycle Mode
1. After a Manual Cook Mode or a Preset Program Cook Mode expires, the oven will enter End of Cook
Cycle Mode.
2. During this mode, "DONE" is shown.
3. If User Option OP:11 or OP:12 is selected, the oven will continue to sound until the user
acknowledges this by either opening and closing the door or pressing
selected, after 3 seconds beeping, the oven will enter Ready Mode.
8. Preset Program Cook Mode
1. This mode allows cooking through a one-button-touch operation. While in Ready Mode, press one of
the number buttons to run a Preset Program for relative cooking time.
2. The remaining cooking time is shown. If it is multi-stage cooking, the total remaining cooking time is
displayed.
3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.
9. On the Fly Cooking
1. While the oven is cooking, if User Option OP:51 is selected, press a number button will enable a
preset cooking program to start automatically.
2. The display shows the remaining cooking time.
3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.
12
FB864_FE142-E_ML_A5_v3_20221227.indb 12 FB864_FE142-E_ML_A5_v3_20221227.indb 12
. If User Option OP:10 is
2022/12/27 15:12 2022/12/27 15:12