When cleaning, please use professional lens tissue or other professional detergent to clear the dirt on the lens. Registered trademark and copyright: Copyright ownership of this produc belongs to Lanoptik Technologies Ltd. Without written authorization of this company, any organizations or individuals shall not photocopy, print, or translation to another language to any part of this document.
Windows 7 (64bit), Windows 8 (64bit), Windows 8.1 (64bit), Windows 10 (64bit) , Windows 11 (64bit) Dual core 3GHz or higher CPU 100Mbps / 1000Mbps network interface 8G or more memory DVD-ROM driver (only needed when installing software) www.lanoptik.com - 2 -...
Page 5
User's Manual | Digital Comparison Microscope BD1601 Chapter 3 Packing List Microscope body Rotatable ball head x2 Clamp holder x2 Quick-mount rail x2 Object distance AC/DC power adapter extension ring x2 Hand screw x8 Installation tools Cable Stage clip x2 www.lanoptik.com...
User's Manual | Digital Comparison Microscope BD1601 Chapter 4 Introduction of Each Part 4.1 Product schematic and part name Camera Movable hand wheel Lens Main light Clamp holder Rotatable ball head Adjustable stage Lifting hand wheel Side light Ports and Indicator lights www.lanoptik.com...
User's Manual | Digital Comparison Microscope BD1601 4.2 Product parts introduction 4.2.1 Camera Signal indicator Blue light flashing, output signal. : Turn right (ON), turn on the camera; turn left (OFF), turn off the Power switch : camera. Light does not shine, abnormal power supply; red Indicator light stays Power indicator :...
User's Manual | Digital Comparison Microscope BD1601 4.2.3 Lens Focal length fixing screw: After loosening, turn the Focal length adjustment ring 31. Focal length to adjust the focus; after tightening, fix the magnification at the current : fixing screw position.
User's Manual | Digital Comparison Microscope BD1601 4.2.5 Clamp Holder 51. Rotation Loosen the screw, the rotating block can be rotated 360°; tighten the screw to fix : adjustment screw the current rotation angle 52. Clamp holder Turn the screw clockwise to expand the clamp; turn the screw counterclockwise to :...
User's Manual | Digital Comparison Microscope BD1601 4.2.7 Clamp Holder Rotate clockwise, the stage rises; counterclockwise rotation, the stage 71. Z axis adjustment knob descends; each turn of the knob, the stage moves 1.5mm, Z-axis : travels 50mm. Rotate clockwise, the stage moves to the inside; counterclockwise 72.
Page 11
User's Manual | Digital Comparison Microscope BD1601 4.2.9 Clamp Holder Loosen the knob to swing the position of the articulated arm arbitrarily within a certain range; tighten the knob to fix the current 91. Adjustment knob position of the articulated arm. (Note: When you need to swing the :...
User's Manual | Digital Comparison Microscope BD1601 4.2.10 Ports and Indicator Lights Connected to the camera on the right through the network cable to realize 01. CAM1 interface : power supply and signal transmission to the camera. 02. USB 5V 1A power It is connected with the USB power interface of the main light and side light to :...
User's Manual | Digital Comparison Microscope BD1601 Chapter 5 Product Installation 5.1 Stage assembly 5.1.1 Ball head and quick-mount rail assembly 1. Adjustable stage and ball head assembly Place the ball head on the round platform, and the ball stud hole is aligned with the screw hole of the bottom plate.
User's Manual | Digital Comparison Microscope BD1601 5.1.3 Ball head and quick-mount rail assembly 1. Install the stage clips in the form of image 6. (Figure 6) 2. Screw the screws on the stage clips to the round platform with a screwdriver. (Figure 7)
User's Manual | Digital Comparison Microscope BD1601 5.2 Cable Connection Network cable connection: Connect the camera to the bracket network port (the CAM1 or CAM2 interface is marked on the bracket) with the network cable. Camera on the right is connected with the CAM1 interface, and camera on the left is connected with the CAM2.
User's Manual | Digital Comparison Microscope BD1601 Chapter 6 Instructions 6.1 Start to Use Software installation (software installation and usage instructions, please refer to the software manual) Stage assembly (Detailed reference 5.1 ) Cable connection (Detailed reference 5.2 ) 6.2 Instructions After the device is connected, open the software.
User's Manual | Digital Comparison Microscope BD1601 Chapter 7 Disclaimer 1. In order to protect the legitimate rights and interests of users, please carefully read the instructions, disclaimers and safety instructions provided with this product before using it. The company reserves the right to update the above documents.
Page 18
Specifications are subject to change without any obligation on the part of the manufacturer. LANOPTIK TECHNOLOGIES LTD No. 72 Hongjing Street, Lejia Road, Baiyun District, Guangzhou, China. 510400 Phone: +86 20 3898 6017 | Fax: +86 20 3847 6076 Website: http://www.lanoptik.com | Email: info@lanoptik.com...