JVC RV-DP200BK Service Manual page 20

RV-DP200BK
Removing the flywheel
(See Figs. 7 and 8)
1. Remove the head amplifier & mechanism control
P.C. board.
2. Remove the main motor assembly.
3. After turning over the cassette mechanism,
remove the slit washers b and c fixing the capstan
shafts R and L, and pull out the flywheel R and L
respectively from behind the cassette mechanism.
Flywheel R
Removing the reel pulse P.C. board and solenoid
(See Fig. 9)
1. Remove the five pawls d~h and screw C retaining the reel pulse
P.C. board.
2. From the surface of the reel pulse P.C. board parts, remove
the two pawls i and j retaining the solenoid.
Solenoid
1-20
Flywheel L
Fig. 8
j
i
Flywheel R
Capstan shaft R
C
Slit
washer
C
h d
e
f
Fig. 9
Flywheel L
Capstan shaft L
b
Slit
washer
Fig.7
Reel pulse P.C. board
g