Luxen Home WHF1378 Instruction Manual

Resin deer outdoor fountain with led lights

Advertisement

Product Name:
Resin Deer Outdoor Fountain with LED Lights
SKU #:
WHF1378
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of
safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts. If
any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Fountain
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR600-LED
Tools required for assembly: No tools required assembly.

ASSEMBLY INSTRUCTIONS:

1. Unpack the contents of the box and check to make sure that all items are accounted for and in good condition.
2. Remove the pump from the package and untie the power cord.
4. From the opening at the back of the fountain, insert the water supply tube into the pump outlet ①. Connect the pump
3. Select a flat, level surface for the assembly and final location of your fountain.
adapter cord to the LED cord and twist to tighten the connection ②. Place the pump upright in the back of the
5. Connect the power cord to the transformer and twist to tighten. ③
fountain opening.
6. Add clean water into the reservoir. The water level should be approximately 30mm lower than the edge of the
reservoir. Ensure the pump in your fountain is completely submerged in the water
7. Connect the power cord from the pump to a properly grounded, grounding type receptacle (GFCI).
8. If installed properly, water flow in the fountain will begin shortly.
9. Adjust the flow rate (if applicable) to the maximum (+) position. If necessary, readjust the flow rate to the desired level
(remember to always disconnect from the power source before handling the pump).
10. Please do not use the electrical plug during wet weather conditions. Please note: On first use, there may be air in the
pump. It may take several minutes until all the air escapes.
Quantity
1
1
Contact:
cs@winsomehouse.com
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WHF1378 and is the answer not in the manual?

Questions and answers

Summary of Contents for Luxen Home WHF1378

  • Page 1 Resin Deer Outdoor Fountain with LED Lights SKU #: WHF1378 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY. Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
  • Page 2 Instruction Manual SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for power units. Product Name: Resin Deer Outdoor Fountain with LED Lights SKU #: WHF1378 Note: The above diagram is for illustrative purposes only. Contact: cs@winsomehouse.com...
  • Page 3 Product Name: Resin Deer Outdoor Fountain with LED Lights SKU #: WHF1378 MAINTENANCE OF YOUR PUMP: Keep the water clean – clean water will prolong the useful life of your pump. • •...
  • Page 4 Product Name: Resin Deer Outdoor Fountain with LED Lights SKU #: WHF1378 Check the water level regularly to ensure the pump is completely submerged during operation. The pump should be • fully submerged during operation. Do not add water while operating the product. Always disconnect the pump from the power source before adding water.

Table of Contents