Download Print this page

VADO AXCES AX-MAT-110-CP Instruction Booklet

Advertisement

Quick Links

This instruction booklet covers model:
AX-MAT-110-CP
VADO
Wedmore Road, Cheddar,
Somerset, England BS27 3EB
tel 01934 744466
fax 01934 744345
www.vado.com
sales@vado.com
INSTALLATION /
USER MANUAL
MONO BIDET MIXER WITH
POP-UP WASTE
Version 1, 1-9-19
KEEP FOR FUTURE REFERENCE
MATRIX

Advertisement

loading

Summary of Contents for VADO AXCES AX-MAT-110-CP

  • Page 1 KEEP FOR FUTURE REFERENCE MATRIX This instruction booklet covers model: AX-MAT-110-CP INSTALLATION / USER MANUAL VADO Wedmore Road, Cheddar, Somerset, England BS27 3EB MONO BIDET MIXER WITH tel 01934 744466 fax 01934 744345 POP-UP WASTE www.vado.com sales@vado.com Version 1, 1-9-19...
  • Page 2: Important - Please Read

    Important - please read Contents of Packaging Please read these instructions carefully before starting installation and keep for future reference. Remove all packaging and check the product for missing parts or damage before starting installation. Any alterations made to this product and fittings may infringe water regulations and will invalidate the guarantee.
  • Page 3 Dimensions Installation - Quick guide 100mm 1/2” 60mm...
  • Page 4: Installation

    Installation - Quick guide Installation Before installing your new mixer, flush Control through the pipe work to ensure removal handle of debris, turn off the water supply. Ensure the O-ring is in place in the bottom of the mixer body. Position the mixer on the basin.
  • Page 5 Installation - Pop-up waste Operation - mixer Dissemble the pop-up waste and Control reassemble onto the basin. Insert the vertical control rod (with knob) down through the hole in the back of the mixer body and screw into the extension rod. Cold Unscrew the ball joint retainer on the side of the pop-up waste...
  • Page 6: Cleaning Instructions

    •The extended guarantee is only available if you have completed the Guarantee Registration Process. This can be done via the VADO website or via phone to our aftersales team. Registration must be completed within 6 months from date of purchase.