Table of Contents
Advertisement
Symptom
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required ("CHECK"
keeps flashing on the display).
• Tracks do not play back in the order you have
intended them to play.
• Elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear alternately on
the display.
• Correct characters are not displayed (e.g.
album name).
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all.
24
Remedy/Cause
• Use a disc with MP3/WMA tracks recorded in the format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3/WMA
tracks.)
Do not use too many hierarchies and folders.
Playback order is determined when files are recorded.
This sometimes occurs during play. This is caused by how
the tracks are recorded on the disc.
Insert a disc that contains MP3/WMA tracks.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Reset the unit (see page 3).
Advertisement
Table of Contents
