Advertisement
Available languages
Available languages
EN
FEATURES
FEATURES
1. EXTERNAL MEASURING JAWS
1. EXTERNAL MEASURING JAWS
2. INTERNAL MEASURING JAWS
2. INTERNAL MEASURING JAWS
3. DEPTH BLADE
3. DEPTH BLADE
4. STEP MEASURING FACES
4. STEP MEASURING FACES
5 BEAM
5 BEAM
ΤECHNICAL SPECIFICATIONS
ΤECHNICAL SPECIFICATIONS
MODEL
MODEL
Measuring Range
Measuring Range
Resolution
Resolution
Accuracy
Accuracy
Repeatability
Repeatability
Max Measuring Speed
Max Measuring Speed
Display
Display
Power
Power
Working Temperature
Working Temperature
Note
Note
APPLICATIONS
APPLICATION
1. Operation:
1. Operation:
Slider can be removed only after the locking screw (#10) is loosened.
Slider can be removed only after the locking screw (#10) is loosened.
2. Basic measuring methods:
2. Basic measuring methods:
a. Loosen the locking screw.
a. Loosen the locking screw.
b. Press "ON" button, select SAE or metric measerument by pressing "mm/inch" button. Pressing "mm/inch" button after measurement will display the
b. Press "ON" button, select SAE or metric measerument by pressing "mm/inch" button. Pressing "mm/inch" button after measurement will display the
SAE/metric conversion.
SAE/metric conversion.
c. To reset display to zero, close external measuring jaws, then press "zero" button.
c. To reset display to zero, close external measuring jaws, then press "zero" button.
MAINTENANCE
MAINTENANCE
1. Keep the calliper clean and dry (Liquid can damage the slider)
1. Keep the calliper clean and dry (Liquid can damage the slider)
2. Use a clean, dry cloth to clean all surfaces - Do not use solvents or solvent based cleaners.
2. Use a clean, dry cloth to clean all surfaces - Do not use solvents or solvent based cleaners.
3. In order to save power, turn off the unit when not in use.
3. In order to save power, turn off the unit when not in use.
4. Avoid contact with electrical and/or electronic devices.
4. Avoid contact with electrical and/or electronic devices.
BATTERY REPLACEMENT
BATTERY REPLACEMENT
Flashing display indicates low battery, to replace battery, removery batter cover by sliding cover in the direction indicated and replace battery with positive
Flashing display indicates low battery, to replace battery, removery batter cover by sliding cover in the direction indicated and replace battery with positive
side facing out.
side facing out.
TROUBLESHOOTING
TROUBLESHOOTING
FAILURE
FAILURE
Display flashes
Display flashes
Display does not change when slider is moved
Display does not change when slider is moved
Accuracy less than ± 0,001 mm
Accuracy less than ± 0,001 mm
No display on LCD
No display on LCD
3
6. SAE & METRIC SCALE
6. SAE & METRIC SCALE
7. BATTERY COMPARTMENT
7. BATTERY COMPARTMENT
8. OUTPUT CONNECTOR
8. OUTPUT CONNECTOR
9. LCD DISPLAY
9. LCD DISPLAY
10. SLIDER CLAMP SCREW
10. SLIDER CLAMP SCREW
BHT7782
BHT7782
0 -150 mm / 0 - 6 in, 0 - 200 mm/0-8 in
0 -150 mm / 0 - 6 in, 0 - 200 mm/0-8 in
0,01 mm / 0,0005 in
0,01 mm / 0,0005 in
± 0,02 mm / 0,001 in (<100 mm)
± 0,02 mm / 0,001 in (<100 mm)
± 0,03 mm / 0,001 in (> 100 - 200 mm)
± 0,03 mm / 0,001 in (> 100 - 200 mm)
0,01 mm/ 0,0005 in
0,01 mm/ 0,0005 in
1,5 m/sec, 60 in/sec
1,5 m/sec, 60 in/sec
LCD Display
LCD Display
one alkaline lithium buttton cell battery 1,5 V, Type LR44, Capacity = 180 m
one alkaline lithium buttton cell battery 1,5 V, Type LR44, Capacity = 180 m
5
5
C - 40
C - 40
C / 41 to 104 degrees Fahrenheit
C / 41 to 104 degrees Fahrenheit
o
o
o
o
Accuracy affected in environments exceeding 80% relative humidity
Accuracy affected in environments exceeding 80% relative humidity
CAUSE
CAUSE
Low battery
Low battery
System locked
System locked
Dirt in the sensor
Dirt in the sensor
1. Improper battery position
1. Improper battery position
2. Low battery
2. Low battery
WWW.NIKOLAOUTOOLS.GR
11. THUMB ROLLER
11. THUMB ROLLER
12 ON/OFF SWITCH
12 ON/OFF SWITCH
13. ZERO SWITCH
13. ZERO SWITCH
14. SAE & METRIC CONVERSION SWITCH
14. SAE & METRIC CONVERSION SWITCH
Replace battery
Replace battery
Remove battery and replace after 30 seconds to reset system
Remove battery and replace after 30 seconds to reset system
Remove slider cover and its assebly, clean with compressed air 5 kg/cm
Remove slider cover and its assebly, clean with compressed air 5 kg/cm
1. Remove battery cover and check battery position
1. Remove battery cover and check battery position
2. Replace battery
2. Replace battery
MEASURE
MEASURE
2
2
Advertisement
