Using The Dual Cassette Deck; Playing Cassette Tapes - RCA RP-7987 User Manual

Using the Dual
Cassette Deck
Understanding the Buttons
If you know what each button does, it's easy to figure out
how to operate the tape decks.
RECORD — Press to record from the radio, CDs, or
another tape.
PLAY — Press to play cassettes.
REWIND — From stop mode, press to rewind the tape
toward the beginning.
F. FORWARD — From stop mode, press to advance
the tape toward the end.
STOP/EJECT — Press to stop current tape activity, or to open
the cassette compartment door when no buttons are active.
PAUSE — Press to interrupt tape play or record mode. Press a
second time to resume tape play or tape record mode.
HIGH SPEED TAPE DUBBING — Use to speed up tape-to-tape
recording.

Playing Cassette Tapes

You can play cassettes from either of the two tape decks.
1. Turn the Function Control knob to TAPE.
2. Press STOP/EJECT to open one of the cassette
compartment doors.
3. Insert a cassette tape into the door with the top of the
tape going in first.
4. Close the door securely.
5. Press REWIND or F. FORWARD to move tape to the
desired starting point.
6. Press PLAY to begin playing the tape.
Continuous Tape Play
1. Turn the Function Control knob to TAPE.
2. Insert a cassette into each tape deck.
3. Press PLAY and then PAUSE on Deck 1.
4. Press PLAY on Deck 2.
When the tape on Deck 2 finishes, the tape in Deck 1 starts
automatically.
8
1
TAPE
REC/PLAY PLAYBACK
HIGH SPEED TAPE
DUBBING
RECORD PLAY REWIND F FORWARD STOP/ PAUSE
EJECT
DISC
RADIO
Quit Slacking
A little bit of slack in
your tapes can cause
scratches on the tape,
or worse yet, the tape could break.
If you notice some slack in the
tape, use a pencil to tighten it up
before you insert it.
2
TAPE
PLAY REWIND F FORWARD STOP/ PAUSE
EJECT
TAPE
A