Installing a Switch
Figure 22: Connecting the StackWise-480/1T Cable in a StackWise Port
1
Step 3
Connect the other end of the cable to the port on the other switch and finger-tighten the screws. Avoid
overtightening the screws.
To remove the StackWise-480/1T cable from the connector, make sure you fully unscrew the correct screws.
When the connectors are not being used, replace the dust covers.
Caution
Cisco logo
Removing and installing the StackWise cable can shorten its useful life. Do not remove and insert
the cable more often than is absolutely necessary (installing and removing it up to 200 times is
supported).
Connecting a StackWise-480/1T Cable
2
Connector screws
Installing a Switch
19