Nikon CoolPix P3 User Manual page 141

Error Messages During Wireless Transfer Mode
Display
Transfer error
u
Profile not registered.
Set up profile.
u
u NETWORK
CONNECTION FAILED
Battery exhausted.
Transfer terminated.
w
u Failed to connect to
XXX
Connection error.
u
Failed to register
printer profile.
u
UNABLE TO CONNECT TO
WIRELESS PRINTER
ADAPTER.
u
* For more information, see the manual for the optional PD-10 wireless printer adapter.
Problem
Error occurred when
images were trans-
ferred to computer.
A profile for wireless
transfer has not been
set.
Camera could not con-
nect to wireless net-
work.
Battery has become
depleted while images
were being transferred.
Camera could not con-
nect to selected profile
device (computer).
Wireless connection
with the profile device
stopped while camera
was connected to the
network.
Printer profile for wire-
less transfer could not
be set.
Camera could not con-
nect to wireless printer
adapter.
Solution
Check signal. Move the camera closer
to the printer. Remove any obstacles
between camera antenna and profile
device.
Set profile device with Wireless Camera
Setup Utility or the optional PD-10
wireless printer adapter.
Check selected computer or access
point.
Check network settings.
Charge battery and turn camera on in
Wireless transfer mode.
Check selected computer.
Check signal. Move the camera closer
to the printer. Remove any obstacles
between camera antenna and profile
device.
Check that the printer is on and ready
to print.*
Check signal. Move the camera closer
to the printer. Remove any obstacles
between camera antenna and profile
device.
Page
–
P.114
P.123
P.16
P.123
–
–
–
139