4� Parts; 5� Troubleshooting - BLUGARDA BluFeeder Manual

4. PARTS
5. TROUBLESHOOTING
Probleem
No working display
Display visible, but device does
not work
The paddle rotates, but no feed
is thrown
Are you unable to solve the problem? Contact our customer service at www.blu-
garda.shop and we wwill help you further.
No. Part
1 Transparent protective cover
2 Solar panel
3 Reservoir cover
4 Protection grid
5 Reservoir for pellets
6 Screw
7 Blade cover
8 Blade paddle
9 Screw
10 Housing
11 Pellet spout
12 Screw
13 Control panel cover
14 Foot rests
15 Anchor pins
Oorzaak
Loose connector cable
Battery is empty
On/off switch not in correct po-
sition
The paddle is stuck
Feed is clumped
BluFeeder manual
Oplossing
Unscrew underside and check
connector cables
Place in sunlight so the battery
charges
Switch to I (on)
Clean the paddle and remove
unwanted materials
Removing feed lumps
EN
9