Advertisement
THANK YOU FOR CHOOSING XYLEM
Please take a few minutes to review this manual before you start installation. If you encounter any
installation problems, please don't hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new product and inspect for
damage.
The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply.
SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver
ROUGH-IN DIMENSIONS
Rev 3/07
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
TM
Level
INSTALLATION INSTRUCTIONS
10'
Drill
Tape Measure
KENT
MIRROR
M-KENT-24DK / M-KENT-24WT
Safety Glasses
TM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Xylem KENT M-KENT-24DK
Summary of Contents for Xylem KENT M-KENT-24DK
- Page 1 The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply. SUGGESTED TOOLS AND MATERIALS Philips Screwdriver Level Drill Tape Measure Safety Glasses ROUGH-IN DIMENSIONS Rev 3/07 For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time...
- Page 2 • Clean the product by using a soft, slightly damp cloth. Buff the product by using a soft dry cloth. When cleaning the mirror, spray the mirror with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes. Rev 3/07 For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time...
Need help?
Do you have a question about the KENT M-KENT-24DK and is the answer not in the manual?
Questions and answers