Samsung HG43AJ690YJ Install Manual page 33

Hotel Option menu Item
Sub Amp Mode
Bathroom
Speaker
Sub Amp Volume
Power Saving Mode
Eco
Solution
Power Saving Mode Timer
Welcome Message
Edit Welcome Message
Hospitality Logo
Logo/
Message
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto Initialize
Description
Determines the bathroom speaker sound AMP operation mode.
• 0: Turns the bathroom speaker sound AMP function off (PWM off).
• 1: The bathroom speaker sound volume follows the TV speaker sound volume
identically. The bathroom speaker sound volume is controlled by the TV remote
control or TV Controller button.
• 2: The bathroom speaker sound volume is controlled by the bathroom speaker
volume controller.
The initial bathroom speaker sound volume after TV is turned on.
Adjusts the brightness of the TV to reduce power consumption.
• OFF: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Adjust the Power Saving mode Time.
• Setting value: 0~99
• This function is only available when Magilink is selected in Interactive SI Vendor.
Displays the welcome message for 60 seconds when the TV turns on.
Edits the welcome message.
Turns the Hospitality Logo function is set to OFF, BMP, AVI, BOTH. If the function is
not set to OFF, the TV is turned on, the logo is displayed, before the signal from the
initial source, for the amount of time set in Logo Display Time.
• The DivX codec is not supported.
You can download the startup logo from the connected USB flash drive.
Hospitality logo file requirements:
• Image or video files only.
• The image file is supported up to 2 MB.
• The video file is supported up to 50 MB.
• File can only be named "samsung_image.*", "samsung_video.*"
Set the time displayed Hospitality Logo. (3/5/7 seconds).
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, the TV menu items are restored again to their
values cloned initially when the TV turns off and then on.
English - 33