Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Nikon Firmware Update for Coolpix 2500 Version
1.1
Notes:
1. It is most important that you follow the supplied directions; failure to follow
all of the steps may result in your camera being disabled.
2. This update is for Coolpix 2500 cameras only! It is strongly suggested that
you avoid any background process that may disrupt the Updater
communication process.
3. It is advised not to touch the mouse or keyboard once the uploader starts
to ensure against accidental launch of an application or other process.
4. This Software and Firmware is Licensed and Copyright of Nikon
Corporation Japan
1.0 System requirements
1. Windows Users:
Compatible with:
Microsoft Windows 98 Second Edition (SE)
Microsoft Windows 2000 Professional
Microsoft Windows Millennium Edition (Me)
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
1
You must have Administrator authority on your computer to install,
uninstall, or run the Uploader Software. See your network administrator if
you require this authority.
System Requirements:
CPU: Pentium 120Mhz or greater
Hard Disk Space: 5MB or more
1
1
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nikon CoolPix 2500
Summary of Contents for Nikon CoolPix 2500
- Page 1 1. It is most important that you follow the supplied directions; failure to follow all of the steps may result in your camera being disabled. 2. This update is for Coolpix 2500 cameras only! It is strongly suggested that you avoid any background process that may disrupt the Updater communication process.
- Page 2 2.0 About software and firmware The “Firmware Uploader Software for the E2500 Ver.1.1” is a computer program that updates the firmware in your Coolpix 2500 (E-2500). The firmware is a program, which runs inside the camera and controls its operation. By running the Uploader Software you will install the new firmware in the camera.
- Page 3 This utility will update the firmware in your Coolpix 2500 to version 1.1. It can only be used if the version of the firmware in your Coolpix 2500 is version 1.0 and is not suitable for use with any other model of Coolpix camera.
- Page 4 3. Coolpix 2500 User’s Manuals 4. Download and decompress the appropriate version (Macintosh or Windows) of the updater files. NOTE: Please use only authentic Nikon AC adapters and cables; other products may damage the COOLPIX 2500. 8.0 Installing the Uploader Application-Macintosh...
- Page 5 3. Connect the AC power adapter EH-60 to the camera and plug the power cable into a power outlet. Users who prefer a battery power source should insert a fully charged Nikon EN-EL2 rechargeable battery described above. *The uploader may fail if a battery that is not fully charged is used.
- Page 6 Do not perform a forced exit of the uploader software, turn the camera off, or disconnect the USB cable during the upload process. Doing so could result in a malfunction of the Coolpix 2500 Digital Camera. 10. The firmware upload process will begin.
- Page 7 15. Refer to step 6 above to confirm that the firmware version is now 1.1. This completes the update. Note: If you wish to use Nikon View, you will need to restart your system. If you adjusted the camera's USB mode setting for firmware upgrade, return USB mode settings to their previous setting.
- Page 8 Any other display, "E2500V1.0" for example, indicates that your computer cannot be used to upgrade camera firmware. In this case you will need to take your camera to the nearest Nikon-authorized service center to upgrade the firmware. 2. Compatibility problems may exist between the uploader and certain computers, making normal communication with the Coolpix 2500 impossible.
Need help?
Do you have a question about the CoolPix 2500 and is the answer not in the manual?
Questions and answers