Ptz Setup; Mobile; Mobile Phone Access; Motion Detect - Night Owl FS84500 Instruction Manual

5.2.11.3 Motion Detect

Red = Motion Detection Enabled
Clear = Motion Detection Disabled
NOTE: You can click and drag the mouse cursor when selecting/deselecting the motion area.

5.2.11.4 Mobile Phone Access

To configure the Motion Detection function of
the DVR, click "MAIN"  "ADVANCED"  "MD" to
enter the MOTION DETECT window.
STATUS: This option allows you enable motion
detection on the channels.
SENSITIVITY: This option allows you to set
sensitivity level of motion detection from 1 to 4 with 4
being the most sensitive.
MD AREA: Click this button of the corresponding
channel to select the area you want to have motion
detection. The channel is separated into a 13*10
area. When any movements in the selected area are
detected, recording or alarm will be triggered. The
semi-transparent area means no motion detection
will be performed in those areas.
If you would like to allow your DVR to be
accessible by a Mobile device, click "Main Click
"MAIN MENU"  "ADVANCED"  "MOBILE" to
open the "MOBILE" menu.
Server Port: It is the mobile monitoring port.
Setting range is between 1024 and 65535.
Please note that the server port number must not
equal to network menu's "PORT" setting.
29
User's Manual